From Joe Tegtmeyer.

Gigafactory Texas! This is where Model Y’s, and Cyber Truck production happens and in 2025, the Next Generation Car(s), Cybercab & the Optimus Robot!

Great day to fly around Giga Texas today with bright sun, moderate temperatures and no wind. Despite the early morning start, we see production gearing back up after the weekend, most of the outbound lot empty as transport operations over the weekend moved a lot of new vehicles to the distribution centers, and of course, construction was underway all over the site.

I also captured more movement of transformers from the west side staging areas on trailer trucks and headed north on the main highway away from Giga Texas.

Timestamps:
Drone flight overview with discussion & illustration: 0:06 to 3:25
Drone flight footage & infographics: 3:48 to 30:32

In the video introduction, I further discuss the side-by-side comparisons between Cybertruck and Cybercab front castings that we saw on my previous video. Some viewers could not tell that there were any differences (size, design, appearance) so I thought I’d try and make it more clear with additional information.

I labelled the two castings for easy identification and discussed the noticeable differences between the two. Fortunately, on today’s flight, I was able to get a different angle closeup view which accentuates the size differences so check that out in the main video!

I also talk about the appearance of the extraneous pieces that are remnants of the casting process, including the “biscuit” and how this is trimmed off using the DMG MORI milling machines I documented arriving and being installed inside several years ago. Finally, I provide an engineering video clip showing the casting process, how the casting appears immediately after being removed from the casting machines and why the excess needs to be trimmed off. I do hope this makes it obvious how the Cybertruck and Cybercab front castings differ and how the process works

I also show more recent images of the Robotaxi initial fleet of Model Y’s that will be part of the service kickoff less than a week from today (if the timelines mentioned by Elon Musk hold). These images show the labelling on the sides and the rear of the Model Y’s and what you can expect when one arrives after it has been hailed via the Tesla Robotaxi app.

Finally, I discuss the 1-year anniversary of Tesla formally incorporating in Texas following the. Withdrawal from Delaware incorporation. It is hard to believe a year has passed and although this chapter of Tesla has been underway for a year, there are still some lingering details and issues with the state of Delaware still impacting the company and its investors. Hopefully this will be resolved by the 2nd anniversary!

Thank you for watching and I hope this has been informative, educational, and entertaining for you. If you would like, please consider supporting me via Patreon (link is in the description of this video and in the video itself) so I can continue to make and share these incredible videos.

Follow me on
Patreon https://www.patreon.com/joeslastchancegarage
X @JoeTegtmeyer
Instagram (Joe’s Last Chance Garage) for the latest updates: #joeslastchancegarage
Facebook Joe Tegtmeyer and Joe’s Last Chance Garage

If you are interested in purchasing Tesla Products, consider using my referral code!
https://www.tesla.com/referral/joe66892

If you are interested in purchasing Starlink, consider using my referral link below!
https://www.starlink.com/residential?referral=RC-2611272-74550-57&app_source=share

Be sure to check out additional Texas Gigafactory footage on these channels:
@Jeff Roberts
@Brad Sloan

Video, photos, illustrations, and commentary on this video is by me, Joe Tegtmeyer unless otherwise annotated.

Music in this video is obtained from the YouTube free and unrestricted and royalty-free use library. Ending song is Mr. Sunny Face – Wayne Jones

Drones used are DJI Mini 2, Mavic Air 2 & Air 3.

Drone flight over Giga Texas is with permission of Tesla and CEO Elon Musk